Infratech WD3024 33" Stainless 3000 Watt Patio Heater

Infratech WD-3024 (21-2000) Dual Element Electric Stainless Steel Patio Heater, 3000 Watts.

Infratech stainless-steel heaters can be ordered in optional bronze, black, white, biscuit, beige, almond, grey, or copper powder coat. They are also available in marine grade here.

This brand new Infratech radiant patio heater is a solution for many installations! It is only 2' 9" long, and is effective when mounted from 7 to 9 feet high. Now you can have the intensity of a dual element heater that is short enough to be mounted in either direction over most tables (without sunburning anyone's head).

Choose 240 volts for all homes in the USA. Commercial operations choose the voltage you will use for the heaters. We do not recommend infinite controls for this model at 208 volts. (240 volts is OK.)

Infratech stainless-steel heaters can also be ordered in optional bronze, black, white, biscuit, beige, almond, grey, or copper powder coat. 

This Infratech heater can be controlled with a high-amp timer, a duplex-stack switch, or an infinite load control economically. For further information on controls for this heater please go to our Infratech Controls section. High-End Electronic Controls, Universal Control Panel, or Home Management Panel offer the maximum versatility. Please contact us at 888-927-6456 for further information.

The Infratech 6" x 6" stock brackets provide the required 6" top clearance from combustibles (above) when the heater is pointed straight down from the ceiling. However, when the heater is tilted the clearance is reduced by 2" to 3". Choose from the optional 9" and 12" long custom brackets to provide the specified clearance for Infratech heaters that are tilted.

When Infratech's 6" x 6" patio heater mounting brackets are too wide for your mounting surface, choose the 3½" x 9" (for 4x lumber) or 1½" x 6" (for 2x lumber) optional stainless steel brackets.