Infratech CD6024 61" Stainless Steel, 6000 Watt Patio Heater

Infratech CD6024 (21-4300) Dual Element 61" Stainless Steel, Patio Heater, 6000 Watts

Infratech stainless-steel heaters can be ordered in optional bronze, black, white, biscuit, beige, almond, grey, or copper powder coat. They are also available in marine grade here.

Infratech's Contemporary Design Series designed to maximize comfort & design in high visibility spaces. With this 6000 Watt dual element patio heater, you get heat output comparable to (or even greater than according to some reports) an overhead gas patio heater, with a new slicker look. These patio heaters are 5' 1¼" long X 8" X 2 1/2", and each heater requires a 30 amp (at 240 volt) circuit.

The new C-Series CD6024 heaters feature floating mounts with inset mounting brackets for a sleeker look & optimal heat when mounted above 8 feet.

This Infratech heater can be controlled with a high-amp timer, a duplex-stack switch, or dual infinite controls economically. For further information on controls for this heater please go to our Infratech Controls section. High-End Electronic Controls, Universal Control Panel, or Home Management Panel offer the maximum versatility. Please contact us at 888-927-6456 for further information.

The Infratech 6" x 6" stock brackets provide the required 6" top clearance from combustibles (above) when the heater is pointed straight down from the ceiling. However, when the heater is tilted the clearance is reduced by 2" to 3". Choose from the optional 9" and 12" long custom brackets to provide the specified clearance for Infratech heaters that are tilted.

When Infratech's 6" x 6" patio heater mounting brackets are too wide for your mounting surface, choose the 3½" x 9" (for 4x lumber) or 1½" x 6" (for 2x lumber) optional stainless steel brackets.