Infratech WD4024 (21-2100) 39" White 4000 Watt Patio Heater
The WD4024 is a very popular electric patio heater. It is constructed of stainless steel with white powder coating.
Controls
The WD4024 provides the maximum amount of heat within a 20 amp (240 volt) circuit. Choose 240 volts for all homes in the USA. Commercial operations choose the voltage you will use for the heaters.
Mounting
The heater is only 3' 3" long, and is effective when mounted from 8 to 10 feet.
A 6" x 6" Stainless Steel Mounting Kit is included, which provides the required 6" top clearance from combustibles (above) when the heater is pointed straight down from the ceiling. However, when the heater is tilted the clearance is reduced by 2" to 3". Choose from the optional 9" and 12" long custom brackets to provide the specified clearance for Infratech heaters that are tilted.
When Infratech's 6" x 6" patio heater mounting brackets are too wide for your mounting surface, choose the 3½" x 9" (for 4x lumber) or 1½" x 6" (for 2x lumber) optional stainless steel brackets that are for Infratech W-Series patio heaters.
Controls
This Infratech heater can be controlled with a high-amp timer, a duplex-stack switch, or dual infinite controls economically. For further information on controls for this heater please go to our Infratech Controls section. High-End Electronic Controls, Universal Control Panel, or Home Management Panel offer the maximum versatility. Please contact us at 888-927-6456 for further information.
- Infratech Catalog
- Infratech W- Series Installation Manual
- Infratech CAD Drawing Clearances
- Infratech Duplex Stack Switches Wiring Diagram
- Wiring Diagram: Infratech 240 Volt Infinite Regulators. This wiring diagram is for a single element (3500 watt or less at 240 volts) patio heater. Replicate this diagram for the second control and second element when used with dual-element patio heaters.
